GODOX AT-16 studio flash trigger

This studio flash trigger is based on a wireless remote system. The transmitter enjoys an advanced circuit which is designed with sleepy function, so it has very slow power consumption, the receiver is used with alternating current, and it achieves quick response under the advanced MCU control. It can meet the need of sync flash for any different shutter camera. The transmitter is to be attached on the hot shoe of the camera while the receiver is to be plugged into the studio flash. The transmitter emits radio signal to the receiver when shutter is pressed. The receiver, once picks up the signal, will trigger off the external flash unit. This flash trigger unit has strong anti-interference function and has up to 16 channels for you to choose. It is extremely useful if there are several photographers working nearby.


Specification:

Model: AT-16
Channel: 16 Channel
Sync output socket: 6.35mm & 3.5mm
Work distance indoor: 15-35m
Work distance outdoor: approx. 15m
Sync speed: 1/200s
Power supply of the signal transmitter: 23A 12V mini-battery (in the transmitter)
Power supply of the receiver: AC 100-220V with 1 IEC straight female connector and 1 IEC straight mail connector


Notice:
Both the receiver and transmitter have the DIP switch, the trigger will work normally only they are in the same state. The transmitter can’t trigger the receiver which in different state.


Package Included:

1 x transmitter

1 x receiver

1 x PC cord

1 x convert adaptor