1, using high-grade materials, superior feel and luster
2, easy to grip, which can accommodate a lithium battery, with exposure control function
3, with vertical shoot shutter and master trackwheel
4, shape, technology, functionality comparable to the original
5, multi-functional battery box type
Professional control functions:
1, delay, shutter time, the number of shots is set
after set of professional features to locate the three sections of the self-control switch position indication, press SET turn into self-timer delay, the shutter time setting, infrared receiver and shooting and set the number, the delay between camera settings can be set from 1 second to 99 hours 59 minutes 59 seconds. shutter time setting, AV, TV, P, M exposure modes handle the next set will not affect camera itself set the shutter time, and only in B sects, the shutter time can be set to handle a maximum of 99 hours 59 minutes 59 seconds. Continuous state setting, you can shoot up to 99 continuous.
Note: The camera is set to a single camera mode, focus mode selected manually set each use needs to be reset, switch off after the operation is completed in a timely manner.
2, the time setting
buttons on the professional time position, LCD can display the normal time there weeks, optional 12 hours, 24 hours display.
Parts Description:
1, vertical shoot shutter: half press focus, to facilitate vertical (portrait) shooting
two, vertical shoot shutter switch: used to open and lock the vertical shoot shutter, prevent accidentally shooting touch
3, lithium battery holder: Holds a Block EL3e + lithium battery
4, the main dial: dial function consistent with the camera, you can adjust the aperture size and shutter speed
5, the longitudinal position of the aperture value / Exposure compensation button
6, the longitudinal position of the AF point selection / Enlarge button
7, the vertical position AE lock / FE lock / Index / Reduce button
Use Installation:
1, to determine the camera's power switch has been set in the closed position, turn on the camera's battery compartment cover to carefully pull angle of 35 degrees, the battery inside the camera battery compartment out.
2, the camera battery compartment cover can be stored in the handle of the camera battery compartment cover storage place, to prevent loss.
3, the handle column electrodes inserted in the camera's battery compartment, and connect the camera tripod screw holes aligned, tighten the connections shown in the direction of the handwheel. If there are empty spaces between the camera body and the handle, you need to re-install the handle.
4, bringing all the installer all completed. Open the camera's power switch, and confirmed before use information displayed on the camera body's LCD.
5, the handle can be removed in the reverse installation steps.
Note:
1, in order to prevent short-circuiting due to the power terminal of metal caused by physical contact, and when not to use the handle, please cover Interface cover.
2, the handle is not equipped with power switch, use the camera's power switch to turn on or turn off the power.
3, prohibits the battery pack into fire or water, nor to direct the output short-circuit the battery pack.
4, do not decompose or assemble the battery pack.
5, please use the specified charger.
6, independent place or time, unused batteries out of the battery compartment.
0 đánh giá
