Viltrox LCD Timer Remote Controller

Delay / Self Timer (DELAY)
Just like the self timer on your camera. The timer remote switch allows you to set any delay (in 1 second increments) up to 99 hours, 99 minutes and 99 seconds.

Interval Timer (INTVL)
The Interval Timer can be set to any time period up to 100 hours as well. If you set it to 10 minutes, for example, one exposure will be taken every 10 minutes until either the film runs out or the Exposure Count limit has been reached.

BULB/Long Exposure (LONG)
It allows you to take time exposures up to 100 hours long.

Exposure Count (N)
This setting allows you to set the times of exposures that will be taken, up to a total 399 times. For example, if you set it to 30 times, then the exposure will be only taken 30 times.

Specification:

Timer delay: 0s to 99hrs 59min 59s in one-second increments
Exposure time: 0s to 99hrs 59min 59s in one-second increments
Interval: 1s to 99hrs 59min 59s in one-second increments
Number of shots: 1 to 399,-- (unlimited)
Power source: Two AAA 1.5V LR03 alkaline batteries (NOT included!!)
Battery life: Approximately two months of continuous shooting with a delay of 5min, an exposure time of 4min 56s, and an interval of 5min. Use of the illuminator will reduce battery life
Operating temperature: -20 -- +50? (-4 -- +122?)
Dimensions: 155 x 40 x 18 mm (6.1 x 1.6 x 0.7 in), excluding projections
Weight: Approximately 105g (3.7oz), excluding ferrite core
Length of cord: Approximately 850mm (33.5in)